|
$24.95
(US)
1 US Quart
(32 Ounces)
|
Boat PoFabric Waterproofer
include:
| Canvas** |
Boat
Covers, Bimini Tops, Floor Coverings |
| Carpets,
Fabrics** |
Carpet,
Canvas, Upholstery, drapes, furniture |
|
Clothes** |
Painted
Parts, Aluminum, Stainless Steel, Fiberglass, Plastic, Rubber.
|
*
May stain or discolor some materials-Test product in inconspicuous
area first.
Developed to protect and extend the life of marine
fabrics including vinyl, polyester, canvas, and Sunbrella®.
Contains UV and mildew resistant agents. Helps prevent damage
from moisture, mildew, oil and grease stains, and other airborne
pollutants.
Heller
Glänz Waterproofer is revolutionary because it combines waterproofing
and protection and is longer lasting than other leading Fabric Waterproofers in the market place. Its unique Fabric Waterprooferlation allows it to penetrate the fabric further,
therefore waterproofing from below the surface, which leaves the
textured finish of the original fabric intact.
Become
one of our thousands of satisfied customers today!
|
Heller Glänz Fabric Waterproofer
Stain Repellent was developed to protect and extend the life of
marine fabrics including acrylics, Sunbrella, nylon, cotton, canvas,
polyester, vinyl, and leather. Helps prevent damage from moisture,
mildew, oil and grease stains, bird droppings and airborne pollutants.
Perfect for boat & sail covers, dodgers, boat shoes, bimini
tops, vinyl seats & cushions, carpets, tents, awnings, patio
furniture.
Most mills, including Sunbrella, apply a
fluorocarbon polymer to the cloth at the factory for waterproofing
and stain repellency. This is the most durable and effective waterproofing
technology currently known. (A polymer is like Teflon for cloth.)
Heller Glänzs Boat Fabric Waterproofer uses virtually the same fluorocarbon technology as the mills do
and is U.V. Resistent and Mildew Resistent.
-
WHY USE Heller Glänz
Boat Fabric Waterproofer
Heller Glänzs Boat Fabric Waterproofer virtually
the same fluorocarbon technology as the mills do to replenish
the polymer lost from the cloth due to age, weather and cleaning.
Sunbrella, for example, recommends replenishing waterproofing
after each cleaning with a polymer-waterproofing agent. Application
is therefore more effective, more durable, and easier to use
than using a less compatible agent.
Heller Glänzs Boat Fabric Waterprooferbeen laboratory
tested against the five leading products in the industry and
has been found to be superior.
-
WHY NOT USE A SILICONE
BASED WATERPROOFING PRODUCT?
While cheaper to make, silicone-based products actually attract
dirt and dust which sticks to the cloth. Not only
does the cloth get dirty, but the dirt also provides the medium
on which mildew grows. Polymer based products do not have this
problem.
-
WHY NOT USE A WATER BASED
PRODUCT?
Water based products too are less expense than solvent based
products at first glance. However, because some waterproofing
is still left in the fabric even after a thorough cleaning,
getting effective coverage using a water-based product is almost
impossible because the existing waterproofing rejects the new
application.
-
BESIDES MARINE CANVAS MATERIALS
LIKE SUNBRELLA, WHAT CAN Boat Fabric WaterprooferSED ON?
Boat Fabric Waterprooferbe used on virtually any material found
on a boat, including vinyl, leather, carpeting and cloth cushions.
-
HOW MUCH AREA WILL ONE
BOTTLE OF Boat Fabric WaterprooferR?
In most cases, a 32oz. bottle will cover approximately 175 square
feet. This can vary according to the absorbency of the material
is being treated and how heavy the application is.
-
HOW FREQUENTLY SHOULD MY
MARINE CANVAS BE WATERPROOFED?
Waterproofing should be applied at least every time the canvas
is cleaned, since even the lightest detergent will remove much
of the repellency of any waterproofing agent. Boat Fabric Waterproofer will last a year in the harshest of weather conditions, however,
under most conditions, it will last several seasons.
-
ARE 2 TREATMENTS MORE EFFECTIVE
THAN ONE? WILL SATURATING THE MATERIAL PROVIDE MORE PROTECTION?
Although one treatment should be sufficient, a second application
or higher saturation will provide more waterproofing to the
fabrics threads. For smaller fabric, we also often apply
Boat Fabric Waterprooferipping the fabric and then allowing
it to drip-dry over an open container. The Boat Fabric Waterproofer has dripped off the fabric is then reusable.
The Boat Fabric Waterprooferuct itself
is also remarkably quick and easy to use. All that is required
to waterproof and protect any previously untreated surface are
two simple spray-on applications.
Heller Glänz Boat Fabric Waterprooferector
is fully compatible with other fabric protectors, so previous
use with other waterproofing agents will not affect the products
performance.
easy to use, trigger-spray Waterproofer and
Protector, which can be used not only on tent and awning canvas,
but also on a wide variety of other surfaces, including cloth, upholstery,
nylon and carpets.
Heller Glänz Waterproofer also has
a much wider use than just tents and awnings and can be used effectively
on camping furniture, equipment and fabrics, especially caravan
upholstery, since it protects against general spills like tea,
coffee, coloured soft drinks and red wine etc. which can be notoriously
difficult to remove.
Tests to date have shown that Heller Glänz
spray-on Waterproofer has been more effective and greater in durability
than other current leading brands. During initial trials, samples
were sent to different manufacturers, retailers and a number of
independent testing adjudicators. Without exception, everyone
was impressed by the product's performance. One test in particular
was staggering to view. A piece of ordinary kitchen paper towel
was treated and then left to float in a bath of water. The paper
towel had still not absorbed a single drop of water after 5 Days.
DIRECTIONS
1) Clean fabric first. Rinse thoroughly and allow to dry. Boat Fabric Waterprooferost effective on clean, dry material.
2) Shake well.
3) Spray, dip, brush or roll on evenly until fabric has a "wet"
look - material does not need to be saturated.
4) Allow to dry for 6 - 12 hours for maximum effectiveness.
5) Use Boat Fabric Waterprooferonally or after each cleaning.
|
|